Installation Procedure
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the oil level indicator tube O-ring seal with clean engine oil.
- Install the oil level indictor tube into the lower crankcase opening.
- Slide the indicator tube behind the tube nut. Tighten the nut.
Tighten
Tighten the nut to 10 N.m (89 lb in).
- Install the oil level indicator.
- Install the front engine mount bracket. Refer to Engine Front Mount Bracket Replacement .
CAUTION:
Refer to Fastener Caution .