LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 4.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Mount Strut Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Mount Strut Bolt
    GM1660428Courtesy of GENERAL MOTORS COMPANY
  1. Install the engine mount strut.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the engine mount strut bolt.

    Tighten 

    Tighten the bolt to 70 N.m (52 lb ft).

    3. Fig 2: Identifying Surge Tank
    GM1660422Courtesy of GENERAL MOTORS COMPANY
  3. Position the surge tank to the studs.
  4. Install the surge tank nuts and push pin retainer.

    Tighten 

    Tighten the nuts to 6 N.m (53 lb in).

scientia non olet · About LEMON Manuals