LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 4.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Flywheel Holder
    GM651420Courtesy of GENERAL MOTORS COMPANY
  1. Remove the transaxle. Refer to Transmission Replacement .
  2. Install the J 44214 to the engine block.
    3. Fig 2: Identifying 8 Engine Flywheel Mounting Bolts
    GM1480384Courtesy of GENERAL MOTORS COMPANY
  3. Loosen the flywheel bolts.
  4. Remove all but one of the flywheel bolts, leaving the one bolt at the top of the crankshaft.
  5. Grasp the engine flywheel with one hand and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.
  6. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection .
scientia non olet · About LEMON Manuals