Turn Signal Multifunction Switch Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Turn Signal Multifunction Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
1	Turn Signal Multifunction Switch Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 7 N.m (62 lb in)
2	Turn Signal Multifunction Switch Procedure: Disconnect any electrical connectors as needed.