LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Steering Wheel & Steering Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Malfunction >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Heated Steering Wheel Control Switch 

  1. Place the heated steering wheel control switch in the OFF position.
  2. Test for infinite resistance between terminal 2 and terminal 8.
    • If less than the specified value, replace the switch.
  3. Place the heated steering wheel control switch in the ON position.
  4. Test for less than 2 ohms between terminal 2 and terminal 8.
    • If greater than the specified value, replace the switch.
scientia non olet · About LEMON Manuals