Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating ICM Ground Strap & Bolt

Courtesy of GENERAL MOTORS COMPANY

Install the ICM ground strap (2).

CAUTION:

Refer to Fastener Caution .

Tighten the ICM ground strap bolt (1) to the camshaft cover.
Tighten

Tighten the bolt to 10 N.m (89 lb in).
Install the ICM ground strap bolt (3) to the cylinder head.
Tighten

Tighten the bolt to 25 N.m (18 lb ft).

Fig 2: Identifying ICM Wiring Harness Ground

Courtesy of GENERAL MOTORS COMPANY

Install the ICM ground strap (2).
Tighten the ICM ground strap bolt (1) to the camshaft cover.
Tighten

Tighten the bolt to 10 N.m (89 lb in).
Install the ICM ground strap bolt (3) to the cylinder head.
Tighten

Tighten the bolt to 10 N.m (89 lb in).
Install the fuel injector sight shield, if necessary. Refer to Fuel Injector Sight Shield Replacement .