LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Battery, Charging System And Starting System) >> Repair Instructions >> Auxiliary Battery and Tray Replacement (Gas) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the primary battery and the auxiliary battery negative cables. Refer to Battery Negative Cable Disconnection and Connection 
  2. Disconnect the auxiliary battery positive cable from the auxiliary battery.
  3. Fig 1: Identifying Lower Auxiliary Battery Tray To Frame Bolts
    GM2014374Courtesy of GENERAL MOTORS COMPANY
  4. Remove the lower auxiliary battery tray to frame bolts (3).
  5. Loosen, but DO NOT REMOVE the upper battery tray to frame bolts (1).
  6. Lift the battery and tray assembly (2) from the upper frame bolts (1).
  7. Fig 2: Identifying Battery Retainer Bolt And Retainer
    GM2014377Courtesy of GENERAL MOTORS COMPANY
  8. Remove the battery retainer bolt and retainer (3).
  9. Remove the battery (1) from the battery tray (2).