Rear Bumper Fascia Molding Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Fascia Molding Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear fascia. Refer to Rear Bumper Fascia Replacement . |
|
| 1 | Rear Fascia Molding Rivet (Qty: 3)
WARNING:
Eye protection must be worn when drilling rivets to reduce the chance of personal injury. |
| 2 | Rear Fascia Molding |