LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Door Ajar Indicator Malfunction >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The driver door module (DDM) and the passenger door module (PDM) receive a discreet input from the driver door ajar switch and the passenger door ajar switch respectively. Likewise, the body control module (BCM) receives a discrete input from both the left and right rear door ajar switches. The door ajar switches are normally open when the doors are fully closed. When a door is open, the door ajar switch contacts close providing a path to ground. The driver information center (DIC) displays the appropriate door open message when one of the doors is open. The instrument panel cluster (IPC) receives a serial data message from either the BCM, DDM or PDM indicating the door ajar status. If the message is displayed and the vehicle speed is greater than 8 km/h (5 mph), a chime will sound as a reminder of the door ajar status.

This vehicle may also be configured as a limousine or a hearse by various upfitters and as such may be equipped with middle doors or a rear door.