LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Frame And Underbody) >> Repair Instructions >> Rear Wheelhouse Panel Liner Replacement

Rear Wheelhouse Panel Liner Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Wheelhouse Liner & Components
GM1584844Courtesy of GENERAL MOTORS COMPANY
Rear Wheelhouse Panel Liner Replacement

Callout Component Name

Preliminary Procedure

  1. Lift and support vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove rear wheel. Refer to Tire and Wheel Removal and Installation .
1 Rear Wheelhouse Liner Screw (Qty: 1)
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Rear Wheelhouse Liner Retainers (Qty: 5)
3 Rear Wheelhouse Liner