LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Frame And Underbody) >> Repair Instructions >> Front Tie Down Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Tie-Down Bracket To Frame Mounting Bolts
    GM829096Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tie down bracket to the frame mounting bolts, left side only.
  3. Remove the tie down bracket from the frame.
scientia non olet · About LEMON Manuals