LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Cooling System) >> Repair Instructions >> Water Pump Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water pump drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Water Pump .
  2. Fig 1: View Of Water Pump Drive Belt & Pulleys
    GM1667179Courtesy of GENERAL MOTORS COMPANY
  3. Remove the water pump drive belt (1) by sliding the belt off of the drive pulley (3) and water pump pulley.