LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan Motor
    GM1664823Courtesy of GENERAL MOTORS COMPANY
  1. Install the cooling fan motor to the fan shroud.
    2. Fig 2: Identifying Cooling Fan Motor Retaining Bolts
    GM1664821Courtesy of GENERAL MOTORS COMPANY
  2. Install the cooling fan motor retaining bolts.

    Tighten 

    Tighten the bolts to 6 N.m (53 lb in).

  3. Install the cooling fan. Refer to Engine Coolant Fan Replacement .
  4. Install the cooling fan assembly. Refer to Engine Coolant Fan Shroud Replacement .
scientia non olet · About LEMON Manuals