LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Seal Replacement - Fender to Hood >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Fender & Hood Seal Retainers
    GM130516Courtesy of GENERAL MOTORS COMPANY
  1. Install the front fender to hood seal (1) to the front fender (3).
  2. Install the push in retainers (4) in order to secure the front fender to hood seal (1) to the front fender (3).
  3. Close the hood.
scientia non olet · About LEMON Manuals