LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Lid Hinge Replacement

Rear Compartment Lid Hinge Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Compartment Lid Hinge & Fasteners
GM1584085Courtesy of GENERAL MOTORS COMPANY
Rear Compartment Lid Hinge Replacement

Callout Component Name

Preliminary Procedure

  1. Remove rear compartment lid. Refer to Rear Compartment Lid Replacement .
  2. Remove Torque rods. Refer to Rear Compartment Lid Hinge Torque Rod Replacement .
1 Rear Compartment Hinge Nut (Qty: 1)
CAUTION:

Refer to Fastener Caution .


Tighten 
25 N.m (19 lb ft)
2 Rear Compartment Lid Hinge Bolts (Qty: 2)
Tighten 
25 N.m (19 lb ft)
3 Rear Compartment Hinge
scientia non olet · About LEMON Manuals