LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood, Hood Insulator & Push In Retainers
    GM457395Courtesy of GENERAL MOTORS COMPANY
  1. Install the hood insulator (2) to the hood (1).
  2. Install the push in retainers (3) in order to secure the hood insulator (2) to the hood (1).
  3. Close the hood.
scientia non olet · About LEMON Manuals