Front Fender Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support vehicle. Refer to Lifting and Jacking the Vehicle . Remove front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Remove rocker panel moulding. Refer to Rocker Panel Molding Replacement .
1	Front Fender Bolts (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Front Fascia Bolts (Qty: 2) Tighten 10 N.m (89 lb in)
3	Front Fender Nut Tighten 10 N.m (89 lb in)
4	Front Fascia Bolt Tighten 10 N.m (89 lb in)
5	Front Fender Bolts (Qty: 3)
6	Front Fender