LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front End Upper Tie Bar Replacement

Front End Upper Tie Bar Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper Tie Bar & Components
GM1575834Courtesy of GENERAL MOTORS COMPANY
Front End Upper Tie Bar Replacement

Callout Component Name
Preliminary Procedure 
Remove the sight shield. Refer to Front Compartment Sight Shields Replacement .
1 Front Latch Support Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Upper Tie Bar Bolt (Qty: 4)
Tighten 
50 N.m (37 lb ft)
3 Radiator Upper Support Bracket Bolts (Qty: 2)
Refer to Radiator Replacement .
4 Upper Tie Bar