LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning Evaporator Thermal Expansion Valve Replacement

Air Conditioning Evaporator Thermal Expansion Valve Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Thermal Expansion Valve Replacement
GM1659213Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the HVAC Module. Refer to HVAC Module Assembly Replacement .
  2. Remove the heater core. Refer to Heater Core Replacement .
1 A/C Evaporator Tube Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  16 N.m (12 lb ft)

2 Thermal Expansion Valve Bolt (Qty: 2)

Tighten:  16 N.m (12 lb ft)

3 Thermal Expansion Valve O-ring
Tip:  Remove and discard the O-rings. Refer to O-Ring Replacement .
4 A/C Evaporator Tube O-ring
Tip:  Remove and discard the O-rings. Refer to O-Ring Replacement .
5 A/C Evaporator Tube
6 A/C Evaporator Tube Bracket
7 Thermal Expansion Valve