LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Power Mode Mismatch >> Diagnostic Fault Information

Diagnostic Fault Information

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Circuit Short to Ground Open/High Resistance Short to Voltage Signal Performance
B+ - Terminal 2 B1370 06, B1380 06, B1440 00, U0100-U0299, 2, 4 B1370 06, B1380 06, B1440 00, U0100-U0299 - -
Ignition - Terminal 3 B1370 06, B1380 06, U0100-U0299, 2, 4 B1380 06, 1 B1380 01, P1629, 1 -
Ignition - Terminal 1 B1370 06, B1380 06, U0100-U0299, 2, 4 B1370 06, 1 B1370 01, U0100-U0299, 1, 2 -
Ignition - Terminal 5 B1370 06, B1380 06, B1440 00, U0100-U0299, 2, 4 B1440 00, B1441 06, 1 B1441 01, 1 -
Ignition voltage - BCM terminal 21, X4 B1428, 3 B1370 06 - -
Accessory Wakeup Serial Data, BCM Terminal 19, X4 U1814, 3 U0100-U0299, P0513 00 - -
  1. Power Mode Mismatch
  2. Scan Tool Does Not Communicate
  3. This circuit is a pass through circuit in the BCM and will cause the B+ circuit fuse to open.
  4. This circuit/condition will cause the B+ circuit fuse to open, and may cause a no start condition.