Inside Air Temperature Sensor Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inside Air Temperature Sensor Assembly & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the left outer trim plate. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side . Disconnect the inside air temperature sensor electrical connector.
1	Inside Air Temperature Sensor Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 1 N.m (9 lb in)
2	Inside Air Temperature Sensor

Callout

Component Name

Preliminary Procedure

Remove the left outer trim plate. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
Disconnect the inside air temperature sensor electrical connector.

Inside Air Temperature Sensor Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
1 N.m (9 lb in)

Inside Air Temperature Sensor