Heater and Air Conditioning Control Wiring Harness Replacement (w/Evaporator Temperature Sensor)
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Heater & Air Conditioning Control Wiring Harness (w/ Evaporator Temperature Sensor)
Heater and Air Conditioning Control Wiring Harness Replacement (w/Evaporator Temperature Sensor)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove Evaporator Core. Refer to Air Conditioning Evaporator Core Replacement . |
|
| 1 | Heater and A/C Control Lamp Wiring Harness w/Evaporator Temperature Sensor. Procedure Pinch the Evaporator Temperature Sensor locator tabs together from the inside of the HVAC case for sensor removal. TIP: The Evaporator Temperature Sensor is part of the Heater and A/C Control Lamp Wiring Harness and must be serviced as an assembly. |