LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (HVAC System - Automatic) >> Repair Instructions >> Air Inlet Valve Actuator Replacement

Air Inlet Valve Actuator Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Recirculation Actuator & Screws
GM1659222Courtesy of GENERAL MOTORS COMPANY
Air Inlet Valve Actuator Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the HVAC module. Refer to Air Conditioning and Heater Module Assembly Removal and Installation .
  2. Disconnect the recirculation actuator electrical connector.
1 Recirculation Actuator Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
1.0 N.m (9 lb in)
2 Recirculation Actuator