Turn Signal Multifunction Switch Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Turn Signal Multifunction Switch Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement . |
|
| 1 | Turn Signal Multifunction Switch Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 7 N.m (62 lb in) |
| 2 | Turn Signal Multifunction Switch Procedure Disconnect any electrical connectors as needed. |