LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> DTC B2890 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, perform the scan tool Learn Column Soft Stops procedure. Refer to Telescoping Steering Column Calibration 
  2. Operate the vehicle within the Conditions for Running and Setting. Verify DTC B2890 does not reset.
    • If the DTC resets, replace the MSM.