Blower Motor Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Blower Motor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right hand closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side . Disconnect the blower motor electrical connector.
1	Blower Motor Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 1 N.m (9 lb in)
2	Blower Motor

Callout

Component Name

Preliminary Procedure

Remove the right hand closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
Disconnect the blower motor electrical connector.

Blower Motor Screw (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
1 N.m (9 lb in)

Blower Motor