Auxiliary Blower Motor Resistor Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Blower Motor Resistor - Auxiliary

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right hand closeout insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side . Disconnect the auxiliary blower motor resistor electrical connector.
1	Auxiliary Blower Resistor Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 1 N.m (9 lb in)
2	Auxiliary Blower Resistor

Callout

Component Name

Preliminary Procedure

Remove the right hand closeout insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
Disconnect the auxiliary blower motor resistor electrical connector.

Auxiliary Blower Resistor Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
1 N.m (9 lb in)

Auxiliary Blower Resistor