LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Auxiliary Blower Motor Replacement

Auxiliary Blower Motor Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Blower Motor & Components - Auxiliary
GM1660257Courtesy of GENERAL MOTORS COMPANY
Auxiliary Blower Motor Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the floor console. Refer to Console Replacement .
  2. Disconnect the auxiliary blower assembly electrical connectors.
1 Auxiliary Temperature Actuator Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
1 N.m (9 lb in)
2 Auxiliary Temperature Actuator
3 Auxiliary Blower Motor Assembly Screw (Qty: 3)
Tighten 
1 N.m (9 lb in)
4 Auxiliary Blower Motor Assembly
5 Auxiliary Blower Motor Screw (Qty: 3)
Tighten 
1 N.m (9 lb in)
6 Auxiliary Blower Motor
7 Auxiliary Temperature Actuator Mode Cam Screw
Tighten 
1 N.m (9 lb in)
8 Auxiliary Temperature Actuator Mode Cam
9 Auxiliary Temperature Actuator Mode Cam Lever (Qty: 2)
10 Auxiliary Blower Housing Right
11 Auxiliary Blower Housing Temperature Door
12 Auxiliary Blower Housing Left