LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Inlet Assembly Replacement

Air Inlet Assembly Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Air Inlet Assembly
GM1659254Courtesy of GENERAL MOTORS COMPANY
Air Inlet Assembly Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the HVAC module. Refer to Air Conditioning and Heater Module Assembly Removal and Installation .
  2. Disconnect the recirculation actuator electrical connector.
1 Recirculation Actuator Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
1.0 N.m (9 lb in)
2 Recirculation Actuator
3 Air Inlet Housing Door Lever
4 Air Inlet Housing Screw (Qty: 2)
Tighten 
1.0 N.m (9 lb in)
5 Air Inlet Housing Door
6 Air Inlet Housing
scientia non olet · About LEMON Manuals