LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Air Conditioning O-Ring Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure.
    2. Fig 1: Identifying O-Ring Seals & A/C Refrigerant Component
    GM1252797Courtesy of GENERAL MOTORS COMPANY
  2. Remove the O-ring seals from the A/C refrigerant component.
  3. Inspect the O-ring seals for signs of damage.
  4. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    5. IMPORTANT:

    Cap or tape the open A/C refrigerant components immediately to prevent system contamination.

  5. Cap or tape the A/C refrigerant components.
  6. Discard the O-ring seals.
scientia non olet · About LEMON Manuals