LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Instrument Cluster Gauges Inoperative >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:

If the suspect gauge is the speedometer, the drive wheels of the vehicle must be raised and the transmission must be placed in drive or first gear.

  1. Ignition ON, perform the IPC gauge sweep test with the scan tool. Verify that all the gauges sweep from their low to high position.
    • If any of the gauges do not sweep from their low to high position, replace the IPC.
  2. Engine ON, transmission in drive or first gear, verify the scan tool Vehicle Speed parameter matches the speedometer display.
    • If the Vehicle Speed parameter does not match the speedometer display, test or replace the IPC.
scientia non olet · About LEMON Manuals