LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Fuel Gauge Inaccurate or Inoperative >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, remove the fuel level sender.
  2. While sweeping the fuel level sensor through its full range of motion, test for a minimum value of less than 41 Ω and a maximum value greater than 119 Ω between signal terminal B and the low reference terminal C.
    • If not within the specified range, replace the fuel level sensor.