LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reveal Molding & Screws
    GM1644013Courtesy of GENERAL MOTORS COMPANY
  1. Starting at the bottom of the reveal molding, pull the weatherstrip (1) off of the windshield pillar flange.
  2. Pull back the rubber extension under the fender.
  3. Remove the screws (2) from the reveal molding (3).
  4. Remove the reveal molding.
scientia non olet · About LEMON Manuals