LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Hood Latch, Plastic Retainer & Bolts
    GM2014611Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the vehicle:
    • The plastic retainer
    • The 3 bolts (1)
    3. Fig 2: Identifying Hood Latch Release Cable & Hood Latch
    GM2014618Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the hood latch release cable (2).
  4. Remove the hood latch (1) from the vehicle.
scientia non olet · About LEMON Manuals