LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the hood.
  2. Remove the hood secondary catch and primary latch. Refer to Hood Primary and Secondary Latch Replacement .
  3. Remove the hood primary latch cable release lever. Refer to Hood Primary Latch Release Cable Handle Replacement .
    4. Fig 1: Exploded View Of Hood Latch Cable Clamps & Grommet
    GM2014620Courtesy of GENERAL MOTORS CORP.
  4. Using a taped flat-bladed tool, disconnect the hood latch cable clamps.
  5. Pull the cable at the grommet (1) from the engine compartment and remove it.
scientia non olet · About LEMON Manuals