LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Handle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Hood Latch Cable, Retaining Tabs & Hood Latch Release Handle
    GM2014619Courtesy of GENERAL MOTORS CORP.
  1. Connect the retaining tabs (1), and install the hood latch release handle (2).
  2. Connect the hood latch cable (3).
scientia non olet · About LEMON Manuals