LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Plastic Retainers & Hood Insulator
    GM2014592Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the hood:
    • The 7 plastic retainers
    • The hood insulator
scientia non olet · About LEMON Manuals