LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Bumper Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Hood Front Bumper Screws
    GM2014596Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the hood front bumper (1) from the vehicle by unscrewing.
scientia non olet · About LEMON Manuals