LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Bumper Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Front Bumper Screws
    GM2014596Courtesy of GENERAL MOTORS CORP.
  1. Install the hood front bumper (1). Turn the bumper all the way down.
  2. Perform the vertical hood adjustment. Refer to Hood Adjustment .
  3. Lower the hood.
scientia non olet · About LEMON Manuals