LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays & Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: The ignition switch must be in the OFF position when removing the instrument cluster assembly.
  1. Remove the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 1: Removing/Installing Instrument Cluster Screws
    GM2015056Courtesy of GENERAL MOTORS CORP.
  2. Remove the three screws.
    3. Fig 2: Exploded View Of Instrument Cluster And Electrical Connector
    GM2015058Courtesy of GENERAL MOTORS CORP.
  3. Pull out the instrument cluster and disconnect the electrical connector.
  4. Remove the instrument cluster assembly.
scientia non olet · About LEMON Manuals