Engine Oil Pressure Indicator Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics Connector End View Reference: Component Connector End Views |
|||
| 1 | Did you review the Instrument Panel Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Instrument Cluster Description and Operation |
| 2 | Verify that the engine oil indicator is always ON. Does the engine oil indicator operate normally? |
Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
| 3 | Disconnect the oil pressure switch connector. Does the oil pressure indicator remain lit? |
Go to Step 4 | Go to Step 5 |
| 4 | Repair the short to ground in the oil pressure indicator signal circuit between the oil pressure switch and cavity 10 of the instrument panel cluster. Refer to Wiring Repairs
. Did you complete the repair? |
Go to Step 6 | - |
| 5 | Replace the oil pressure switch. Did you complete the repair? |
Go to Step 6 | - |
| 6 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |