LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G5 Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Control Lever Knob Replacement >> Installation Procedure

Installation Procedure

    NOTE: Place the shift control in NEUTRAL before attempting to install the shift knob screw.
    Fig 1: Shift Knob & Bezel
    GM1662978Courtesy of GENERAL MOTORS CORP.
  1. Install the bezel (2) and shift knob (1) to the shift control lever.
    2. Fig 2: Shift Knob Retaining Screw
    GM1662979Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the shift knob retaining screw (1) and tighten to 2 N.m (18 lb in).
    3. Fig 3: Shift Knob Bezel
    GM1662980Courtesy of GENERAL MOTORS CORP.
  3. Secure the shift knob bezel (1) to the shift knob.
scientia non olet · About LEMON Manuals