LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G5 Base, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T45-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Shift Control Mechanism
    GM1663966Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control (3) to the vehicle.
  2. Connect the shift lock solenoid harness connector (4).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the shift control nuts (2) and tighten to 25 N.m (18 lb ft).
    4. Fig 2: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  4. Connect the shift cable to the shift control assembly.
  5. If the shift control knob was removed, install the shift control knob. Refer to Transmission Control Lever Knob Replacement .
  6. Install the console. Refer to Front Floor Console Replacement .
scientia non olet · About LEMON Manuals