LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 1.6L (LDE, LLU, And LXV) Or 1.8L (2H0) - Repair Instructions - On Vehicle) >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install J 28647-B:  Engine Support Fixture.
  2. Remove the manual transmission. Refer to Transmission Replacement D16.
  3. Install KM-6625:  locking device to block the crankshaft.
  4. Install the transmission bolt with KM-6625:  locking device.
  5. Fig 1: Flywheel & Bolts
    GM2049589Courtesy of GENERAL MOTORS CORP.
  6. Remove the flywheel bolts.
  7. Remove the flywheel (1).