LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Engine Mechanical - 1.6L (LDE, LLU, And LXV) Or 1.8L (2H0) - Repair Instructions - On Vehicle) >> Camshaft Intake Sprocket with Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Sprockets, Caps & Bolts
    GM2049382Courtesy of GENERAL MOTORS CORP.
  1. Install the camshaft intake sprocket (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the camshaft intake sprocket bolt (3).

    Tighten:  Tighten the camshaft sprocket bolt to 65 N.m (47.9 lb ft).

  3. Install the camshaft intake sprocket bolt cap (4).

    Tighten:  Tighten the camshaft sprocket bolt cap to 50 N.m (36.8 lb ft).

  4. Install the timing belt. Refer to Timing Belt Replacement .
scientia non olet · About LEMON Manuals