LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hood Hinge Bolts
    GM1719803Courtesy of GENERAL MOTORS CORP.
  1. With the aid of another technician, position the hood in the location marked during removal.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 2 bolts securing the hood to each hinge and tighten to 20 N.m (15 lb ft).
  3. Install the washer hose.
  4. Inspect the hood for proper alignment.
scientia non olet · About LEMON Manuals