LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Hood Secondary Latch
    GM1719808Courtesy of GENERAL MOTORS CORP.
  1. Connect the hood release cable to the latch.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the hood latch with the screwsand tighten to 8 N.m (71 lb in).
scientia non olet · About LEMON Manuals