Removal Procedure
- Raise and support the vehicle.
- Drain the transaxle fluid.
- Remove the inlet pipe union bolt and washers from the radiator.
- Remove the inlet and outlet pipes retaining bolt.
- Remove the fluid cooler inlet pipe bolt from the transaxle.
- Remove the inlet pipe fitting nut from the transaxle.
- Remove the fluid cooler inlet pipe and hoses.
WARNING:
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.