One Way Clutch Disassemble
Courtesy of GENERAL MOTORS CORP.
- Install the one-way clutch and thrust washer to the rear planetary sun gear.
- Hold the rear planetary sun gear and turn the one-way clutch. The one-way clutch should turn freely clockwise and should lock counterclockwise.
Courtesy of GENERAL MOTORS CORP.
- Using a screwdriver, remove the snap ring from the 2nd brake hub.
Courtesy of GENERAL MOTORS CORP.
- Remove the one-way clutch from the 2nd brake hub.
Courtesy of GENERAL MOTORS CORP.
- Using a small screwdriver, remove the retainer from the 2nd brake hub.