LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - AISIN 81-40LE - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> One Way Clutch Assemble

One Way Clutch Assemble

    Fig 1: One-Way Clutch & 2nd Brake Hub
    GM1246034Courtesy of GENERAL MOTORS CORP.
  1. Install the retainer to the 2nd brake hub.
  2. Install the one-way clutch.
  3. Fig 2: Snap Ring, 2nd Brake Hub & Screwdriver
    GM1246036Courtesy of GENERAL MOTORS CORP.
  4. Using a screwdriver, install the snap ring.
  5. Fig 3: View Of One-Way Clutch And Thrust Washer, & Rear Planetary Sun Gear
    GM1866240Courtesy of GENERAL MOTORS CORP.
  6. Install the one-way clutch and thrust washer to the rear planetary sun gear.
  7. Hold the rear planetary sun gear and turn the one-way clutch. The one-way clutch should turn freely counterclockwise and should lock clockwise.